Selleys Quick Fix Supa Glue Liquid

Fast setting liquid supa glue which dries clear.

Features

• Bonds a variety of surfaces
• Extremely fast setting
• Dries clear for clean, neat results
• Water resistant
• No clamping necessary
• No mixing required
• Maximum strength achieved in 12 hours
• Sets in 10 seconds
• Self piercing, clog free cap
• Forms a rigid bond
• Comes with nozzle for easy, accurate application

Where can this product be used?

• Ideal for small repair jobs or when immediate results are required
• For interior projects and repairs
• Water resistant not water proof, therefore not suitable for surfaces that will be continually wet
• Not suitable for bonding plastics such as Polypropylene and Polyethylene
• Not suitable for repairing items that are in direct contact with hot liquids eg saucepans
• Will not permanently bond glass or materials containing alkaline elements
• Has no gap filling properties therefore surfaces need to be a close fit
• Not recommended for highly porous surfaces

What materials is this product suitable for?

• Plasterboard
• Cabinet
• Plaster coving
• Carpet & carpet grippers & carpet floor tiles
• Wood
• Particle boar
• Metals (other surface must be porous)
• Glass (other surface must be porous)
• Ceramics (other surface must be porous)
• Brick (other surface must be porous)
• Concrete
• Cork
• Polystyrene foam (other surface must be porous)
• UPVC (other surface must be porous)
• Many rigid plastics (other surface must be porous)
• Loose wall tiles (in non-wet areas)

What materials is this product suitable for?

• Metals
• China
• Rubber
• Leather
• Some plastics

How to use this product

• Supa Glue works best when the surfaces to be bonded are close fitting.
• Surfaces to be bonded should be clean, dry and free of dust.
• Pierce seal at end of tube by attaching nozzle and cap and turning clockwise.
• Remove cap and apply a small amount of glue to one surface.  Bring surfaces together and apply slight pressure.
• The product grabs within 2-30 seconds, depending on environmental conditions and materials to be bonded.
• Allow 30 minutes for sufficient bond strength for practical use.

Handy tips

• Supa Glue can create a white residue on the surface of a material if the area is not well ventilated.  Clean the affected area with acetone (most nail polish removers) to remove residue.
• Excellent when used with other adhesives, as the temporary tack.
• For best results, ensure surfaces to be bonded are clean, free of dust, dry and close fitting.
• After use, wipe excess product from the nozzle with a tissue dipped in nail polish remover.
• For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.
• In the event that fingers get stuck together - don't panic! Slowly twist fingers in opposite direction in hot soapy water.
• Acetone (most nail polish removers) or Olive oil can also be used to remove Quick Fix from skin.
• While supa glue is not recommended for use on some plastics, if your kids have broken their favourite toy, try this method:  Line up the two pieces, glue it, leave it for 24 hours to dry, then drop more glue on the break area like a 'collar'/protective layer.
• Since Quick Fix cures with moisture set times may be extended on very dry surfaces or under dry conditions.
• Supa glues cure more slowly when large amounts are used.  For faster cure use sparingly.
• To remove excess from materials, it is recommended that the material be soaked in a solution of acetone and water (i.e. 3 parts acetone to 1 part water). Where soaking is not possible, try placing a piece of  absorbant material (eg cotton wool) soaked in acetone on the excess for 5 to 10 minutes, topping up the acetone if it evaporates.  Gently rub the surface with the material to remove the residues.  TEST THE SURFACE IN AN INCONSPICUOUS SPOT to ensure it is unaffected by acetone before attempting removal using this method.
• Do not squeeze tube before removing cap. Handle tube by plastic nozzle neck when opening and closing cap. This prevents pressurizing tube which may force material into cap, preventing a tight seal after use.  

Safety tips

• Avoid contact with the skin and eyes.
• Avoid breathing vapour.
• Quick Fix is non-hazardous once cured.  Where Quick Fix residues are on the skin, it is recommended that the skin be soaked in warm to hot water to allow easy removal. It is not advisable to try to remove the cured adhesive by pulling and scraping the skin as this will only serve to damage the skin. Alternatively rub in hand cream or vegetable oil to accelerate the natural process of the skin sloughing off to remove the residue.  Where immediate adhesive removal is considered necessary apply a solvent such as acetone (nail polish remover) then wash off with soapy water.  Apply hand cream to replace naturals oils in skin.
• Do not use near eyes or open wounds.
• In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
• Non toxic when set.

All Our Prices Include GST

WE DELIVER NEW ZEALAND WIDE