Where can this product be used?

• Filling cracks and holes on surfaces where no structural movement occurs
• Filling cracks and chips in walls, ceilings, doors, windows
• Repairing holes and dents in walls, ceilings, doors and windows
• Recommended for both interiors and exteriors
• Not recommended for use in temperatures under 5°C
• Not recommended for use on plastics
• Not recommended for use in wet conditions or on surfaces that are regularly underwater
• Product is not flexible so not suitable for use between surfaces that are subject the structural movement

What materials is this product suitable for?

• Plaster
• Brick
• Concrete
• Stone
• Mortar
• Timber
• Primed metal

How to use this product

• Ensure surfaces are clean, dry and free of loose material.
• Exterior surfaces should be primed before application.
• Using a flexible filling knife, press the filler firmly into crack/hole and smooth off surface. Permafilla has minimal shrinkage - no need for excessive overfill. For deeper cracks apply in 6mm layers allowing each layer to dry before applying the next.
• Allow 2-3 hours to set in 2mm applications, in thicker applications and colder weather allow for longer drying times.
• Once completely set, Permafilla can be sanded to a feathered edge for a perfect finish.
• Paint with water or oil-based paints after applying an undercoat.

Handy tips

• Product has minimal shrinkage so there is no need for excessive overfilling
• Clean tools in water before product sets
• If filler is dry, add one teaspoon of water and mix in
• Use patching tape to support the product when bridging larger holes.
• Sand back to a smooth finish.
• Before painting, clean dust and filler particle.

Safety tips

• A low hazard material
• If in eyes, holds eyes open and rinse with water. Seek medical attention if irritation persists

All Our Prices Include GST

WE DELIVER NEW ZEALAND WIDE