HOLDFAST® FIXALL® 220 MS SEALANT 425gm

HOLDFAST® FIX ALL® 220 MS SEALANT 425gm

RRP:

~~$24.95~~

Your Price:

$17.60 (You save $7.35)

SKU:

20067-3122

Brand:

Holdfast

Weight:

0.40 KGS

Availability:

Usually ships within 24 hours of payment confirmation.

Shipping:

Calculated at checkout

Product Description

HOLDFAST® FIXALL® 220 MS SEALANT

Description

FixAll® 220 is a high quality, neutral, elastic single component joint sealant based on MS-Polymer.

Characteristics

− Tested and conform to ISO 116000-F-25LM

− High bond strength on nearly all surfaces

− Excellent adhesion and extrudability, even in adverse conditions

− High performance mechanical properties

− Almost odourless

− Resists mould growth

− No bubble formation within sealant, even in wet and humid conditions

− Primer-less adhesion on many substrates (except where water pressure may occur)

− Colour stable and UV resistant

− Ecological advantages – free of iso-cyanates, solvents, halogens and acids

− Paintable with all water based paints (other systems should be tested)

− Excellent weather resistance in all climates

Applications

− Expansion and connection joints in the building industry: sealing of joints in prefabricated buildings,

movement joints in high rise constructions, sealing between window and door frames.

− Flexible joints in marine and automotive applications.

− Applications that should be painted with water based paints.

Joint Size

Minimum width: 5mm

Maximum width: 30mm

Minimum Depth: 5mm

Recommendation: width should equal 2 x depth

Application

Method: Manual or pneumatic caulking gun.

Application Temperature: +1°C until +30°C.

Clean: Holdfast® Bulldog Powdercoat cleaner immediately after application and

before curing.

Finish: tool with soapy solution before skin formation.

Application Limitations

− When painted with oxidative drying paints disturbances in the drying of the paints may occur.

− FIXALL® 220 must not be applied to frost-bearing surfaces or if temperature will be below freezing.

− The suitability of this product, for each intended use, must be determined by the purchaser prior to acceptance.

− Pre-testing for adhesion is intended to eliminate potential field problems. This testing will aid in determining the proper surface preparation method.

− FIXALL® 220 may be over-painted, however due to the large number of paints and varnishes we strongly recommend a compatibility test before application. The drying time of alkyd resin based paints may increase.

− FIXALL® 220 should not be used as a glazing sealant.

Health and Safety Recommendations

− Apply the usual industrial hygiene.

− Please refer to the MSDS for more detailed information.

Tests and Certifications

New Zealand: Agriquality Approval (REF #h1540)

New Zealand: BRANZ Appraisal No. 419

Belgium: ATG 98.2241 (ISO 11600-F-25LM)

Germany: MPA-NRW 22-0902 5 98 to DIN 18540-F

UK: BBA SC 007/01 (ISO 11600-F-25LM)